22
NOTE:
y The second method to adjust brake level is under the driver
seat and rear brake component.
y In order to avoid a pre-load occurred between brake disk and
lining. After all adjusting of brake system are completed,
please check the small clearance between brake disk and
lining.
Loosen the adjustable nut near the rear brake caliper. Screw the
adjustable bolt by hand with C.W. turn to the end, then back to a
quarter turn. Tighten the nut to complete the parking brake
adjustment.
Also, as you fount out the brake ability which is a bit insufficient,
you can screw the adjustable nut of parking Brake
.
Adjustable nut
Rear Brake
To Next Page
Loading...
