EVAstream Electrical connections - PCB Settings 3
1 About this manual
1.1 Language
This manual is meant for the qualified electrician who performs the electrical connection of the
product. Read and understand this manual before connecting and using this product. This manual is
originally written in English. All other language versions are translations of the original manual.
1.2 Other relevant documents
1.3 Used symbols
This manual contains safety instructions. Ignoring these instructions may lead to injury or damage
to the appliance. Each safety instruction is indicated with a signal word. The signal word corresponds
with the level of risk of the described hazardous situation.
This symbol indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
This symbol indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
This symbol indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
Indicates a situation that, if not avoided, could result in damage to the product
or to the environment.
Document
EVAstream: Mounting - Installation
EVAstream: User manual
EVA LED underwater light
www.evaoptic.com/downloads/
www.evaoptic.com/downloads/
www.evaoptic.com/downloads/
6
CAUTION
6
DANGER
6
WARNING
NOTICE
1 About this manual 3
1.1 Language 3
1.2 Other relevant documents 3
1.3 Used symbols 3
2 Safety 4
2.1 Safety warnings and regulations 4
2.2 General safety instructions 4
3 Product 5
3.1 Intended use and reasonably foreseeable unintended use 5
3.2 Description 5
3.3 Connections 6
3.4 General specifications 6
3.5 Electrical specifications 7
4 Electrical installation 8
4.1 Connect EVAstream turbine to Motor Control Unit 8
4.2 Connect EVA Piezo to Motor Control Unit 10
4.3 Finishing the installation of the Motor Control Unit 12
5 PCB settings - general information 13
5.1 Preparation 13
5.2 EVAstream LEDs 13
6 Controlling with EVA Experience web app 14
6.1 Technical tablet requirements 14
6.2 Network connection 14
6.3 Setting the PCB and WIFI 15
6.4 New network configuration (AP mode) 17
6.5 Home network configuration 20
6.6 Setting for first use 23
6.7 Update Firmware 25
7 Controlling with EVA Piezo (without EVA Experience web app) 26
8 Disposal 27
8.1 Decommissioning 27
8.2 Disposal 27
Attachments - Overview of the EVAstream Control Print 28
Table of contents
To Next Page
Loading...
