Evco EVJ825P9VX3 - Technical Specifications

EVCO S.p.A. EVJ800 | Installer manual ver. 2.0 | Code 144J800E204
page 45 of 50
11 TECHNICAL SPECIFICATIONS
11.1 Technical specifications
Purpose of the control device Function controller
Construction of the control device Built-in electronic device
Container Black, self-extinguishing
Category of heat and fire resistance D
Measurements 111.4 x 76.4 x 48.0 mm (4 3/8 x 3 x 1 15/16 in)
Mounting methods for the control
device
Front installation model:
to be fitted to a plastic or metal
panel, with elastic holding flaps
Model for installing behind glass
or methacrylate:
with double-sided tape
Degree of protection provided by the
casing
IP65 (front), provided that the device is installed on a metal panel
0.8 mm (1/32 in) thick
Connection method
- Fixed screw terminal blocks for wires up to 2.5 mm² (plug-in
screw terminal blocks for wires up to 2.5 mm² on request)
- Pico-Blade connector
Maximum permitted length for connection cables:
- power supply: 10 m (32.8 ft)
- analogue inputs: 10 m (32.8 ft)
- digital inputs: 10 m (32.8 ft)
- digital outputs: 10 m (32.8 ft)
Operating temperature from -5 to 55 °C (from 23 to 131 °F)
Storage temperature from -25 to 70 °C (from -13 to 158 °F)
Operating humidity relative humidity without condensate from 10 to 90%
Pollution status of the control device 2
Compliance
- RoHS 2011/65/EC
- WEEE 2012/19/EU
- REACH (EC) Regulation no. 1907/2006
EMC 2014/30/EU
- LVD 2014/35/EU
Power supply 230 VAC (+10 % -15 %), 50/60 Hz (±3 Hz), max. 6 VA
Earthing methods for the control device none