Evco EVJ825P9VX3 - Recipes

EVCO S.p.A. EVJ800 | Installer manual ver. 2.0 | Code 144J800E204
page 25 of 50
6.11 Recipes
The controller provides 7 preset ready-to-use recipes that offer a series of cycles optimised by type of dish. When P3
or E13 is set to 0, any recipes that call for a setpoint for the needle probe or a blast freezing are not displayed.
These 7 recipes can be modified before starting the cycle, but cannot be saved or over-written.
RED MEATS - NEEDLE PROBE
Phase 1
Cabinet setpoint -25°C
Needle probe setpoint 20°C
Phase 2
Cabinet setpoint -5°C
Needle probe setpoint 3°C
Conservation
Cabinet setpoint 2°C
WHITE MEATS
Phase 1 Cabinet setpoint -25°C
Duration setpoint 27 min
Phase 2 Cabinet setpoint -5°C
Duration setpoint 63 min
Conservation Cabinet setpoint 2°C
SEAFOOD PRODUCTS
Phase 1 Cabinet setpoint -25°C
Duration setpoint 27 min
Phase 2 Cabinet setpoint -5°C
Duration setpoint 63 min
Conservation Cabinet setpoint 2°C
CREAMS
Phase 1 Cabinet setpoint -5°C
Duration setpoint 90 min
Conservation Cabinet setpoint 2°C
LASAGNE
Phase 1 Cabinet setpoint -5°C
Duration setpoint 90 min
Conservation Cabinet setpoint 2°C
VEGETABLES
Phase 1 Cabinet setpoint -5°C
Duration setpoint 90 min
Conservation Cabinet setpoint 2°C