24
6. Ensure child
restraint is
secure.
Try to move the child
restraint in all directions.
IMPORTANT: To properly
protect the child, the child
restraint MUST NOT move
more than 2.5 cm (1 in) from side-
to-side or from front-to-back at
the vehicle belt path. If you
cannot tightly secure the child
restraint, try again or move it to
another location.
Vehicle
Belt Path
Installation with Seat Belt
7. Connect and tighten tether strap.
Connect the tether hook to the anchor behind
the vehicle seat, as shown. (Please consult your
vehicle owner’s manual, as tether anchor locations
may vary.) Pull the strap and tighten the tether
securely.
IMPORTANT: If your tether strap is too short to reach
from your child restraint to your vehicle tether anchor,
you will need a Tether Extender. Please call ParentLink at
1-800-233-5921 (U.S.) or 1-937-773-3971 (Canada).
NOTE: Press the
adjuster release
button to loosen.
To Next Page
Loading...
