36
37
Changing the Harness Position on
an Embrace with A-Lock
As your child grows, you will need to change the harness
strap position so they are routed through the slots
closest to the child’s shoulders. The shoulder harness
straps should ALWAYS be as close as possible to, but
NEVER above the child’s shoulders.
1
Loosen the harness
straps by pressing
the harness release
button while
pulling on the straps.
2
3
Pull both harness straps
through the front of the
child restraint.
There are two positions
on the harness straps.
The top loop is for
newborn use. The bottom
pocket is for use as
your child grows.
Slide the harness strap off
of the splitter plate .
4
Insert both harness
straps into the new
harness position slots.
5
6
Attach the appropriate
pocket on the harness
straps (according to
your child’s size) to the
splitter plate .
Tighten the harness straps by pulling the adjustment
strap on front of the restraint.
Note: Final adjustment of the harness straps must be
completed with the baby in the child restraint.
To Next Page
Loading...
