Evenflo Embrace - Changing the Crotch Strap Position; Removing the LATCH System




38
39

Disconnect the harness
straps (see Changing
the Harness Position,
pages 34 or 36).
Remove the crotch strap
anchor  from the clips
on the bottom of the
carrier, and push the
anchor up through the
slot to the top of the
seat.
Insert the crotch strap
anchor into the slot
that is the closest to
the child AND the
most comfortable 
for the child. Snap the
crotch strap anchor
back into the clips on
the bottom of the seat
shell.
Attach the harness
straps (see Changing
the Harness Position,
pages 34 or 36).
Changing the Crotch Strap Position

1
As your child grows, you will need to change the crotch
strap position so that it is in the slot closest to your child.
The crotch strap should ALWAYS be as close as possible
to, but NEVER under, the child’s bottom.

When the LATCH system is not in use, you MUST
securely store it in the area provided in the bottom of
the base .
Route the harness strap through the belt path on top of
the base then attach the hooks to the slots  located on
each side of the storage area beneath the base.
A loose LATCH harness and hook may injure your child.
Removing the LATCH System
1
2
3
Press the adjuster release
button  to loosen harness
strap.

To remove the hook ,
press the tab  and
twist, then remove from
anchor .


2