44
45
Place the optional Strap
Covers over the
harness straps for your
child’s comfort.
2
Insert front canopy end into the holder . Repeat
on the other side.
Installing the Canopy
The optional Head Support should lie flat against
the seat back, as shown.
Be sure to cut off the plastic attachment between the
head support and the seat pad. Small parts may be a
choking hazard.
Not available on all models.
Installing the Accessories
1
Body Pillow
Harness Covers
Head Support
Seat pad
Canopy
Locking Clip
To order replacement parts you can order online at
www.evenflo.com or contact Evenflo at 1-800-233-5921.
When you contact us, please have the product model
number and date of manufacture (found on the back of
the child restraint).
Not available on all models.
Replacement Parts
Harness System
Head Foam
IMPORTANT:
Support the child’s head. Infants may have difficulty
breathing when in a sitting position. Using additional
padding or pillows behind the infant’s head, or failure
to properly recline the child restraint could increase the
child’s risk of serious injury or death.
The optional Body Pillow 4
is used to help support your
child by placing it in the
restraint, as shown.
To Next Page
Loading...
