Evenheat Rampmaster RM3 - Use Your Smart-Phone to Scan this QR Code to Watch Rampmaster How-To Programming Videos

Rampmaster Operating Manual
Heat Treat ver. RM3 – Feb 2017
Page 16 of 25
Use your Smart-phone to scan this QR code to watch Rampmaster how-to Programming Videos!
VIEW
While at the Standby Position (STbY) While Running a Program At Any Other Position
Pressing once displays the
currently loaded firing program data
Pressing once displays
currently running segment data
No Function
ALARM
While at the Standby Position (STbY) While Running a Program At Any Other Position
Pressing once begins the
Alarm setting process
If Alarm is not sounding, pressing once
begins the Alarm setting process
If Alarm is sounding, pressing
once quiets the Alarm.
No Function
MENU
While at the Standby Position (STbY) While Running a Program At Any Other Position
Pressing once displays the Menu choices.
Menu’s includes Options, System,
Diagnostic and Factory.
Not Useful for Heat Treating
Pressing once allows for adjustment of a feature
not available on Evenheat heat treat ovens
No Function
Numerical Keys
While at the Standby Position (STbY) While Running a Program At Any Other Position
No Function
Pressing 4 Activates Suspend Feature, page 13
Pressing 0 Displays Elapsed Firing Time
Used for data input while
Programming or setting Menu items.
ENTER
While at the Standby Position (STbY) While Running a Program At Any Other Position
No Function No Function
Used to store currently displayed data.
In many instances, pressing ENTER also moves
you to the next point in programming.