26
ENGLISH
► Press the MENU key (2) to view the END-OF-
PHASES TIME during a running AUTOMATIC
CYCLE.
► Press the UP-DOWN keys (9-10) to select the
END-OF-PHASES TIME then press the SET key
(11)
OPTIONS
SETPOINT
ALARM LIST
INTERNAL VALUES
END OF PHASES TIME
MANUAL DEFROST
LIGHT
15:14 07/01/15
► The display will show the list of the END-OF-
PHASES TIME
► When the operation is over either press the
ESC key (4) to go back to the OPTIONS menu or
do not work for 60 seconds.
END OF PHASES TIME
Phase 1 THU 08/01/15 h 13:47
Phase 1 THU 08/01/15 h 13:47
Phase 1 THU 08/01/15 h 13:47
Phase 1 THU 08/01/15 h 13:47
To cancel the AUTOMATIC cycle press the START/STOP button (5) for two consecutive
times. The display will go back to the Home screen.
To Next Page
Loading...
