25
ENGLISH
► Press the MENU key (2) to view the ALARMS
LIST during a working AUTOMATIC CYCLE.
► Select with the UP-DOWN keys (9-10) the
ALARMS LIST item then press the SET key (11)
OPTIONS
SETPOINT
ALARM LIST
INTERNAL VALUES
END OF PHASES TIME
MANUAL DEFROST
LIGHT
15:14 07/01/15
► The display will show the alarms list (active
alarms are identied with ON)
► Press the UP-DOWN keys (9-10) to scroll throu-
gh the alarms
► When the operation is over either press the
ESC key (4) to go back to the OPTIONS menu or
do not work for 60 seconds.
ALARM LIST
Error Pr1 OFF
Error Pr2 OFF
Error Pr3 OFF
Error Pr4 OFF
Error AH OFF
Error PD OFF
► Press the MENU key (2) to display the INTER-
NAL VALUES during a running AUTOMATIC
CYCLE
► Press the UP-DOWN keys (9-10) to select the
INTERNAL VALUES then press the SET key (11)
OPTIONS
SETPOINT
ALARM LIST
INTERNAL VALUES
END OF PHASES TIME
MANUAL DEFROST
LIGHT
15:14 07/01/15
► The display will show the list of the INTERNAL
VALUES
► Press the UP-DOWN keys (9-10) to scroll down
the INTERNAL VALUES
► When the operation is over either press the
ESC key (4) to go back to the OPTIONS menu or
do not work for 60 seconds.
INTERNAL VALUES
Temp cell 15°C
Humidity 40%
Temp Evap 27°C
Temp Cond - - -
Door OFF
High Pres OFF