EasyManua.ls Logo

Everybot RS700 - Safety and Precautions; Electrical Safety Instructions

Everybot RS700
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RS700
06
Safety Information
You may be killed or
seriously injured if
you do not follow this
instruction.
You may be injured or
your appliance may be
damaged if you do not
follow this instruction.
You should refer
to this note when
using your device.
In this manual, various Warnings, Cautions and Notes are provided to help you to avoid potential
hazards that can hurt you and/or damage your robot cleaner. Please keep it in a place easy to access.
Electrical instructions
Please use power source and socket with correct voltage and current.
Do not use unauthorized power adaptor or multiple plugs in a single socket.
Do not use damaged power cord or plug.
Make sure the power cord is not bent or crushed by heavy objects.
When plugging in or removing the power plug, always plug it in or remove it by holding the plug, not the cable.
Do not use a damaged power cord! To repair or replace a damaged power cord, contact a qualified service agent to ensure safety.
Do not touch the plug or wall socket with wet hands.

Other manuals for Everybot RS700