31
X TILTING AND TRIM
TILTING AND TRIM
MANUAL MODELS
IMPORTANT: Use the tilt grip to tilt your out-
board. Do not use the tiller handle as a lever.
Tilt UP
Move tilt/run lever to TILT position.
1. TILT position
Grasp tilt grip on engine cover and tilt out-
board to the full tilt position.
1. Tilt grip
Tilt support will automatically engage.
1. Tilt support bracket
Tilt DOWN
Move tilt/run lever to RUN position.
1. RUN position
Grasp tilt grip on engine cover and raise out-
board slightly.
Tilt support will automatically disengage.
Slowly lower outboard to its normal operating
position.
1
007022
1
007023
WARNING
While outboard is tilted, leave tilt lever
in the TILT position. When the tilt/run
lever is in the RUN position, tilt support
can release unexpectedly and allow
outboard to drop, creating a risk of
serious personal injury or loss of con-
trol.
1
007025
1
007024
To Next Page
Loading...
