EasyManua.ls Logo

evoheat Evo270 - Installation Clearances

evoheat Evo270
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
EvoHeat Evo270 Hot Water Heat Pump Manual
5.3 Handling & Transportation
As a rule, the unit should be stored and/or transported in its shipping container in an upright position and without
water charge. For transport over short distances, and provided due care is exercised, an inclination angle of up to 30
degrees is permitted. During transport and storage, ambient temperatures of -10 to +60 degrees Celsius are
permissible.
5.3.1 Forklift Transportation
When transported by a forklift, the unit must remain mounted on the pallet. The lifting speed should be kept to a
minimum. Due to its top heaviness the unit must be secured against tipping over. To prevent any damage or injury,
the unit must be placed on a level surface.
5.3.2 Manual Transportation
For manual transport, a wooden pallet can be used to place the unit on. Using ropes or carrying straps, a second or
third handling configuration is possible. With this type of handling, care must be taken that the maximum
permissible inclination angle of 60 degrees is not exceeded. If transport in an inclined position cannot be avoided,
the unit should be left to rest at least one hour after it has been moved into final position before operation.
CAUTION: High centre of gravity, place on a level surface!
5.4 Installation Clearances

Other manuals for evoheat Evo270

Related product manuals