R230DCT R255DCT R300DCT R12DCT R14DCT
Product Code
USA
009-0004 009-0004X 010-0004 010-0004X 012-0004 012-0004X 012-0004A 012-0004AX 130-0004 130-0004X
Motor USA
(120V~ 60Hz)
15A 15A 15A 15A 20A
Rated Speed
(min
-1
)
6000 6000 120V: 4600 120V: 4600 3750
Recommended
Max duty cycle
20 mins
Net Weight (lbs)
15.7 lbs 16.1 lbs 21.4 lbs 21.4 lbs 31.3 lbs
Cable Length
3m (10ft) 4m (13ft) 10ft 13ft 13ft
Spindle Thread
Size
M8
Cutting Capacity
At 90°
90mm (3-1/12”) 102.5mm (4-1/16”) 115mm (4 -1/2” ) 115mm (4 -1/2” ) 130mm (5-1/8")
Blade Supplied
General
Diamond
No Blade
Included
General
Diamond
No Blade
Included
Premium
Diamond
No Blade
Included
Premium
Diamond
No Blade
Included
Premium
Diamond
No Blade
Included
Diameter
230mm (9”) 255mm (10”) 300mm (12” ) 30 0mm (12”) 350mm (14")
USA Bore
7/8” 7/8” 1” 1” 1"
NOISE &
VIBRATION DATA
Sound Pressure
Max L
p
a
98.0dB(A) K=3dB(A)
Sound Power
Level Max
L
w
a
109.0dB(A) K=3dB(A)
Handle Vibration
Max Level
6.15m/s
2
K=1.5m/s
2
LABELS & SYMBOLS
Warning
Read Instructions
Wear Safety Goggles
Wear Ear Protection
Wear Dust Protection
Wear Head Protection
Wear Safety Gloves
Wear Safety Boots
Keep Hands Away
Protection Class II
Double Insulated
Waste Electrical &
Electronic Equipment
Triman - Waste
Collection & Recycling
Only use diamond blades.
Do not use toothed blades.
Do not use defected or broken blades
High risk of kickback
Risk of dust inhalation
Risk of Fire. Ensure surrounding area is free from
flammable materials.
Unlock
Lock
Purchase separately
INTENDED USE OF THIS POWER TOOL
This product is a disc cutter saw and has been designed
to be used with diamond blades only. Only use
accessories designed for use in this machine and/or those
recommended specifically by Evolution Power Tools Ltd.
When fitted with an appropriate blade this machine
can be used to cut: brick, paving, concrete and related
construction materials, steel, non-ferrous metals and
natural stone.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The
term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric
shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask, non-
skid safety shoes, hard hat or hearing protection used for
appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in
the o-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising
EN
To Next Page
Loading...
