Evolution R255 MTS User Manual

10
www.evolutionpowertools.com
c) Locate the table saw in a well-lit and
level area where you can maintain
good footing and balance. It should
be installed in an area that provides
enough room to easily handle the size of
your workpiece. Cramped, dark areas, and
uneven slippery oors invite accidents.
d) Frequently clean and remove sawdust
from under the saw table and/or the dust
collection device. Accumulated sawdust is
combustible and may self-ignite.
e) The table saw must be secured. A table
saw that is not properly secured may move
or tip over.
f) Remove tools, wood scraps, etc. from
the table before the table saw is turned
on. Distraction or a potential jam can be
dangerous.
g) Always use saw blades with correct size
and shape (diamond versus round) of
arbour holes. Saw blades that do not match
the mounting hardware of the saw will run
o-centre, causing loss of control.
h) Never use damaged or incorrect saw
blade mounting means such as flanges,
saw blade washers, bolts or nuts. These
mounting means were specially designed for
your saw, for safe operation and optimum
performance.
i) Never stand on the table saw, do not use
it as a stepping stool. Serious injury could
occur if the tool is tipped or if the cutting
tool is accidentally contacted.
j) Make sure that the saw blade is installed
to rotate in the proper direction. Do not
use grinding wheels, wire brushes, or
abrasive wheels on a table saw. Improper
saw blade installation or use of accessories
not recommended may cause serious injury.
(4.1) GETTING STARTED
UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking.
Remove the machine, together with the
accessories supplied from the packaging. Check
carefully to ensure that the machine is in good
condition and account for all the accessories
listed in this manual. Also make sure that all the
accessories are complete.
If any parts are found to be missing,
the machine and its accessories should be
returned together in their original packaging to
the retailer. Do not throw the packaging away;
keep it safe throughout the guarantee period.
Dispose of the packaging in an environmentally
responsible manner.
Recycle if possible. Do not let children
play with empty plastic bags due to the
risk of suocation.
(4.2) ITEMS SUPPLIED
Description Quantity
Instruction Manual 1
Multi-Material Cutting Blade 1
Table Extensions 2
Table Extension Support Struts 4
Leg Set (4 corner Legs) 1 Set
Cross Braces 4
Rubber Feet 4
Blade Guard with
Extraction Port
1
Dust Extraction Hose 1
Mitre Gauge 1
Anti-Bounce Device 1
Adjustable Rip Fence 1
Rear Cantilever Braces 2
Push Stick 1
Fence Rail (2 piece) 1
Fence Rail Joining Tongue 1
Hex Key 1
Blade Changing Spanners (2pc) 1 Set
Assorted fixings 1 Bag
Riving Knife 1
4.3 ADDITIONAL ACCESSORIES
In addition to the standard items supplied
with this machine the following accessories
are also available from the Evolution online
shop at www.evolutionpowertools.com
or from your local retailer.
(4.4)
Description Part No
Multi-Material
Cutting Blade
RAGEBLADE255F
Wood Blade
RAGEBLADE255WOOD

Evolution R255 MTS Specifications

General

Brand	Evolution
Model	R255 MTS
Category	Saw
Language	English