EVS XT-3 Technical Reference

Video and Codecs
The codecs modules allow connections for recording and playback of video material.
Each connector on a codec module is connected to the corresponding J connector on the
COD A or COD B module of a V3X board.
See section "V3X Video and Reference Boards" on page 72 for more details on each
connector specific usage according to the different configurations.
The following video and codecs connectors layouts are available according to your
configuration:
Config Layout Description
222 2 channels version
444 4 channels version
Digital Audio
The digital audio inputs and outputs are available on BNC or on multi-pin (DA-15)
connectors for audio signal inputs and outputs in digital format.
See section "Audio Connections" on page 49 for more details on the DA-15 connectors
pinout according to the different configurations.
The following digital audio connectors layouts are available according to your
configuration:
Config Layout Description
BNC • 16BNC
connectors
(8in and 8out)
DA-15 • 4 multi-pin DA-15
connectors
(2in and 2out)
46 5. Hardware Installation and Cabling
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

EVS XT-3 Specifications

General

Brand	EVS
Model	XT-3
Category	Server
Language	English