Chapter 3
Housing & markings
3.5. Mechanical Outline
The eWON must be fastened on a 35mm DIN rail compliant with EN50022.
To put the unit in place, insert the upper slider into the upper part of the rail, with the
eWON™ tiled around 20°. Then push and rotate the eWON™ downward to put the unit
right.
The eWON2005CD™ is now safely fastened.
(*) For HSUPA modem with part number EW2620A only,
the SIM card drawer is located on eWON top side.
See Embedded HSUPA Modem
Page 12 / 36 eWON 2005CD | IG 001
To Next Page
Loading...
