Appendix A - Pin-outs & connections
A.2.2 - Ethernet WAN
The eWON can be accessed by a 10/100BaseTX Ethernet connection.
This connection can be made with two different cables (straight or crossed).
These cables have 8 copper conductors and are known as UTP Class 5
with RJ45 terminations at both ends.
The type of cable (straight or crossed)
depends on the equipment the eWON will be connected to.
The most current cases are the direct connection with a PC (crossed)
and the connection through a hub/router (straight).
The WAN port have 2 LEDs showing the state and activity on the port.
Position Color & Activity Description
Upper LED
OFF No LINK
GREEN Fixed LINK
Lower LED
GREEN Blinking Activity (RX or TX)
- WARNING -
By default, the WAN interface is disabled.
Page 27 / 36 eWON 2005CD | IG 001
To Next Page
Loading...
Need help?
General
