12
©2018, Industrial Test Systems, Inc. Printed in USA
PH TEST PROCEDURE
RINSE PH PROBE
Remove Probe/Storage Cap and rinse
the pH probe with clean water and blot
pH probe with soft paper towel or cloth
to remove excess water
(never rub or
touch the pH glass bulb)
.
1
TEST
Fill Sample Collection Bottle with sample to be tested.
Submerge the probe in the sample and stir gently.
Then allow to sit in the bottle.
3
SELECT MENU
Press and re-press the button until pH appears in
the top left corner of the display.
2
Things needed in addition to what’s in the kit:
Clean sample collection bottle (provided), clean water
(distilled, deionized, or purifi ed bottled water) for rinsing
(16oz), and soft paper towels for drying the probe.
Ensure pH probe is securely installed (see image at
right). If not, see page 6 for Probe Replacement.
READ RESULTS
The stable icon comes up, rinse the probe with
clean water and return it to the included storage
solution or to pH 4 buffer. NOTE: If using the eXact
iDip
®
app, press the Save Result button at the top of
the Bluetooth Test page to store the displayed result.
4
To Next Page
Loading...
Need help?
General
