AG-Series
19
5. Maintenance and Care
Regular maintenance of the machine increases the lifetime and reliability.
1 It is essential that the machine is serviced regularly to guarantee operation and to keep the machine in
optimal condition. The guarantee automatically expires due to overdue or sloppy maintenance.
2 Always disconnect the main power supply when maintenance is performed on the machine.
3 Do not wet the electronic parts and control during maintenance.
4 Clean the machine on time at the end of each work-shift. Clear out any residuals in the measuring plates
and in the platforms of the machine to avoid any moisture that would affect the next shift of operation.
5 Check regularly for loosening of fix screws at every component, to ensure a reliable operation.
6 If there are doubts about the maintenance activities or if the machine fails to work correctly always contact
the supplier or the manufacturer.
To Next Page
Loading...