AG-Series
11
3. Installation
3.1. Environment
Place the machine on a flat, level floor. This is essential for problem-free operation of the machine. Movable
packaging machines must be secured against unintentional rolling away.
Enough space must be left around the machine for good ventilation. The space must be at least 1” (25mm).
For products which are sensitive to temperature and humidity, e.g. may melt or consolidate after being
exposed in the atmosphere after taking out from storage bags, make sure the environment fulfils the criteria
for production.
The ambient temperature must be between 5℃ and 35℃. When operating the machine in other ambient
temperatures the user must contact the supplier for advice.
The ambient relative humidity must be between 10% and 60%. When operating the machine in other ambient
relative humidity, the user must contact the supplier for advice.
NEVER place the machine in a windy environment, which the wind may severely affects the running of the
machine, e.g. mis-feeding of film, mis-filling of materials etc.
NEVER place the machine directly next to a heat source or a steaming device.
3.2. Power
Check the voltage stated on the machine tag is the same as the power supply voltage.
Always connect the machine correctly to an earthed socket to avoid danger for fire or electrical shocks.
Always disconnect the power if there are problems with the machine or during maintenance, prior to starting
work on the machine.
The power cable must always be free and nothing may be placed on it.
Replace the cable immediately if damaged.
If the machine is stationary for a long period then the power should always be disconnected.
3.3. Connecting Compressed Air (If Applicable)
Only dry compressed air may be used for the machine.
The diameter of the hose nipple connecting the compressor is 10mm.
To Next Page
Loading...