Excell GW User Manual

EXCELL PRECISION CO., LTD
02005159 ZSME300000350
26
2-2-3 Output Format Settings
Select in the RS232 serial interface setting mode to set the
Output Format.
RS232 output format setting
LCD shows the last setting.
 Default setting:
RS232 output format setting
Use ZERO or UNIT keys to select the
output format:
= Same data as the scale
= Gross weight
= Net weight
= Same data as the scale in
simple format
= Same gross data as the scale in
simple format
= Same net data as the scale in
simple format
= Hi/Lo/OK status + Same data as
the scale in simple format
= Hi/Lo/OK status + Simple gross
weight
= Hi/Lo/OK status + Simple net
weight
= Tare value
= M+ Transmission 1 note 1
= M+ Transmission 2 note 2
= Brazil printing format note 3
= Brazil printing format note 4
= Brazil printing format note 5
 Format 12.13.14 are only for Brazil
Format 10.11 are not available on
counting mode
Press TARE | PT key
Use ZERO or UNIT key to
select the output format
Press TARE | PT key
Key in the parameter “00”
Press TARE | PT key to exit
1 ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward

Excell GW Specifications

General

Brand	Excell
Model	GW
Category	Indicator system
Language	English