Excell GW User Manual

EXCELL PRECISION CO., LTD
02005159 ZSME300000350
31
2-2-6 Auto Transmission at Zero
Select in the RS232 serial interface setting mode to set the
Auto Transmission at Zero.
 When the value of “Auto transmission at zero” set as , the “Auto
transmission at zero” function is not available. Because when the scale is at zero and
keeping stable, the data are keeping transmitted, and that would be the same as
“Continuous Transmission”.
Press TARE | PT key
Use ZERO or UNIT keys to
key in the desired
parameters
Press TARE | PT key
Key in the parameter “00”
Press TARE | PT key to exit
Auto transmission at zero
LCD shows the last setting
 Default setting:
Auto transmission at zero
Use ZERO or UNIT keys to key in the desired
parameters:
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
1 ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward

Excell GW Specifications

General

Brand	Excell
Model	GW
Category	Indicator system
Language	English