Excell GW User Manual

EXCELL PRECISION CO., LTD
02005159 ZSME300000350
8
1-4 Display Description
HI
:
Upper limit
:
Low Power indication
OK
:
Value between HI and LO
1
:
(STABLE) stable indication
LO
:
Lower limit
2
:
(GROSS) gross weight indication
kg
:
Unit “kilogram”
3
:
(
Pcs
) unit weight insufficient indication
lb
:
Unit “pound”
4
:
( PT ) pre-tare indication
t
:
hk tael
5
:
Range 2
Pcs
:
Counting mode indication
6
:
Range 1
0
:
Zero point indication
7
:
M+
Net
:
Net weight indication
1-5 Power Supply
Power Supply Selection
➀ 230Vac ±15％, 50/60Hz, 10W (plugged-in)
➁ 6V / 4Ah rechargeable battery
Power Consumption
Approximately DC 31 mA (Indicator + Load Cell)
Approximately DC 65 mA (Indicator + Load Cell + Display backlight)
Approximately DC 80 mA (Indicator + Load Cell + Wireless 100M)
Approximately DC 65 mA (Indicator + Load Cell + Wireless 10M)
Charging Voltage
DC 10V/1A
Low Battery Warning
Please note when the ( ) symbol keeps flashing on the display, the internal battery
should be recharged.
 The scale will turn off automatically after a few hours when the low battery warning
symbol shows up. The scale must be fully charged, before operating again.
 When the battery status indication is full, the power is about 6.1V; Each block is about
0.2V; When the battery warning symbol shows up, the power is about 5.4V.

Excell GW Specifications

General

Brand	Excell
Model	GW
Category	Indicator system
Language	English