Excell GW User Manual

EXCELL PRECISION CO., LTD
02005159 ZSME300000350
29
2-2-4 Continuous Transmission Settings
Select in the RS232 serial interface setting mode to set the
Continuous Transmission status.
Transmission setting
LCD shows the last setting
 Default setting:
Transmission setting
Use ZERO or UNIT keys to select the
transmission type:
= Command mode
= Continuous transmission
= Constantly auto
transmission
= Shut down RS232
_ = M+ Mode
Press TARE | PT key
Use ZERO or UNIT keys to
select the transmission
type
Press TARE | PT key
Key in the parameter “00”
Press TARE | PT key to exit
1 ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward

Excell GW Specifications

General

Brand	Excell
Model	GW
Category	Indicator system
Language	English