Excell GW User Manual

EXCELL PRECISION CO., LTD
02005159 ZSME300000350
32
2-2-7 Reset Auto Transmission
Select in the RS232 serial interface setting mode to Reset Auto
Transmission.
 When the value of “Auto transmission at zero” set as , the “Auto
transmission at zero” function is not available. Because when the scale is at zero and
keeping stable, the data are keeping transmitted, and that would be the same as
“Continuous Transmission”.
Resetting auto transmission
Use ZERO or UNIT keys to key in the
desired parameters:
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
Press TARE | PT key
Use ZERO or UNIT keys to
key in the desired
parameters
Press TARE | PT key
Key in the parameter “00”
Press TARE | PT key to exit
Resetting auto transmission
The LCD shows the last setting
 Default setting:
1 ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward

Excell GW Specifications

General

Brand	Excell
Model	GW
Category	Indicator system
Language	English