EXCELL PRECISION CO., LTD
02005159 ZSME300000350
2-2-12 RS485 ID Input (Option)
Select in the RS232 serial interface setting mode to reset of
Auto Transmission.
2-2-13 Line Feed Input
Line feed would be available only when was set as or .
Display shows the previous setup
Use upward and downward key to
select, and use
TARE
|
PT
key to confirm
Factory default: 2
Display shows the previous setup
Use upward and downward key to
select, and use
TARE
|
PT
key to
confirm
1
ZERO
key Upward key (0~9 digit entry)
1
UNIT
key Downward key (0~9 digit entry)
1
TARE
|
PT
key Move cursor rightward
1
NET
|
GROSS
key Move cursor leftward
1
ZERO
key Upward key (0~9 digit entry)
1
UNIT
key Downward key (0~9 digit entry)
1
TARE
|
PT
key Move cursor rightward
1
NET
|
GROSS
key Move cursor leftward
To Next Page
Loading...
Need help?
General
