Excell GW User Manual

EXCELL PRECISION CO., LTD
02005159 ZSME300000350
11
1-7 Self-Test Mode
When power is off, hold NET|GROSS key and press ON|OFF key, Wait till display shows
to enter “Self-Test Mode”.
INTERNAL VALUE MODE ( must hook up full-bridge Load Cell to test)
 Press TARE|PT key to enter, and the display shows internal value
 Please check the internal value is within normal range is 0 ~ 400000 (no load)
 Check whether the backlight is on
 Press ZERO key to back to the last screen, the display shows
KEYPAD TEST MODE
 Press TARE|PT key to enter, display shows
Keypad’s internal code: TARE|PT key = 06, UNIT key= 05, 1 NET|GROSS key=04
1 M+|PRINT key = 03, F key = 02
 Press ZERO key to back to the last screen , the display shows
FIRMWARE VERSION DISPLAY MODE
 Press TARE|PT key to enter , display shows the firmware version ,
 Press TARE|PT key again, the display shows maintenance number
for 2 seconds
 Press ZERO key to back to the last screen, display shows
BACK TO THE LAST SCREEN
Press TARE|PT key to exit self-test mode, the scale will re-power on automatically.
Press UNIT key
Press ZERO key
Press UNIT key
Press ZERO key
Press UNIT key
Press ZERO key
Press UNIT key
Press ZERO key

Excell GW Specifications

General

Brand	Excell
Model	GW
Category	Indicator system
Language	English