EasyManua.ls Logo

Explo X2 Wave Flamer - DMX Settings Configuration

Default Icon
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
4.3 DMX-SETTINGS
4.3.1 M-DMX: MODUS
Allows you to toggle the DMX-mode of the device "ON" or "OFF".
4.3.2 M-DMX: STARTADRESSE
Allows you to set the starting address of the first DMX channel from 1 to 507 (Standard 1). The five
followong channels are always reserved for the different DMX functions.
4.3.3 M-DMX: CUSTOMER
Allows you to select between the standard DMX control (Explo) or the special DMX control of the
company Pyroemotions (Pyroemotions).
4.3.4 M-DMX: CH5 VERS.
Allows you to set which version of the DMX channel 5 calculations should be used.
The new calculation (new) is the current method, and the one
described in this manual.
4.3.5 M-DMX: PROTOCOL
Allows you to set whether you want to use the standard DMX control (DMX 512) or the Easy DMX
mode (DMX EASY). A detailed guide of the Easy DMX mode can be found in the description of the
control methods.
Edit DMX settings
M-DMX: Modus
M-DMX: Startadresse
M-DMX: Customer
M-DMX: CH5 vers.
M-DMX: Protocol
M-Set: DMX EASY

Table of Contents