EasyManuals Logo

Expobar MINI 1GR CONTROL/PULSER User Manual

Expobar MINI 1GR CONTROL/PULSER
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
MONROC
Additional handling of the machine
How to store the machine
Disposal of machine
CLEANING AND MAINTENANCE
Remove and insert the porta-filter gently. Never
use excessive force to try to close the porta-filter.
Important:
Avoid placing wet cups directly on the
cup shelf, it may drip into the machine
and cause machine damage.
STORAGE AND DISPOSAL OF MACHINE
Make all the cleaning procedures described in this manual.
Disconnect and roll up the power cord. (this should be performed by a qualified person).
Disconnect the inlet hose from the machine to the water mains and empty the boiler. (this should be
performed by a qualified person).
Clean the drip tray and exterior of the machine.
Cover / pack the machine and store it in a dry place where it isn’t exposed to bad weather conditions.
If the machine should be used after a long period of storage, make sure to run all cleaning procedures
before using the machine again.
Make all the cleaning procedures described in this manual.
Disconnect and roll up the power cord. (this should be performed by a qualified
person).
Disconnect the inlet hose from the machine to the water mains and empty the
boiler. (this should be performed by a qualified person).
Clean the drip tray and exterior of the machine.
Pack and send the machine to a certified recycling center.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Expobar MINI 1GR CONTROL/PULSER and is the answer not in the manual?

Expobar MINI 1GR CONTROL/PULSER Specifications

General IconGeneral
BrandExpobar
ModelMINI 1GR CONTROL/PULSER
CategoryCoffee Maker
LanguageEnglish

Related product manuals