New Elegance
How to store the machine
Disposal of machine
Make all the cleaning procedures described in this manual.
Disconnect and roll up the power cord. (this should be performed by a qualied person).
Disconnect the inlet hose from the machine to the water mains and empty the boiler. (this should be performed by a
qualied person).
Clean the drip tray and exterior of the machine.
Cover / pack the machine and store it in a dry place where it isn’t exposed to bad weather conditions.
If the machine should be used after a long period of storage, make sure to run all cleaning procedures before using the
machine again.
Make all the cleaning procedures described in this manual.
Disconnect and roll up the power cord. (this should be performed by a qualied person).
Disconnect the inlet hose from the machine to the water mains and empty the boiler. (this should
be performed by a qualied person).
Clean the drip tray and exterior of the machine.
Pack and send the machine to a certied recycling center.
STORAGE AND DISPOSAL OF MACHINE
Insert the preheated gasket and
shower into the head group using
the porta-lter. Use both hands.
Rotate the porta-lter into its
locked position using medium
force. Use both hands.
Remove the porta-lter. The new gasket
and shower will remain inside the head
group. (Do not forget to replace the lter
basket inside the porta-lter.)
To Next Page
Loading...
