Need help?Do you have a question about the Extech Instruments DO210 and is the answer not in the manual?
General| Type | Dissolved Oxygen Meter |
|---|---|
| Display | LCD |
| Battery Life | Approx. 200 hours |
| Measurement Range | 0 to 20.0mg/L |
| Temperature Range | 0 to 50°C (32 to 122°F) |
| Temperature Resolution | 0.1°C |
| Power Supply | 4 x AAA batteries |
| Accuracy | ±0.4mg/L |
| Temperature Accuracy | ±0.5°C (±1°F) |
Displays measurement and programming values on the LCD.
Shows the measured temperature value on the display.
Controls power on/off and escapes from menus.
Used for functions, holding readings, and navigating up.
Used for recording data and entering selections.
Used for settings and navigating down.
Location for the instrument's 9V battery.
Cable that connects the probe to the meter.
The sensor assembly for taking measurements.
Procedure for filling the electrolyte container before initial use.
Steps before taking dissolved oxygen measurements.
Procedure for immersing the probe and obtaining readings.
Steps before measuring oxygen in air.
Procedure for holding the probe to measure oxygen in air.
Adjusts for measurement environment altitude.
Adjusts for salinity in measurement solutions.
Selects between Celsius (°C) and Fahrenheit (°F) units.
Enables or disables the auto power off feature.
Overview of the meter's general features and physical attributes.
Details electrical ranges, resolutions, and accuracies.
To Next Page