Delete (Clear) Stored Readings
As described in the dedicated section on the meter’s internal memory feature, the meter can store
up to ninety-nine (99) readings for instant recall. The CLEAR feature in the Setup mode allows the
user to selectively delete stored readings by type or to delete all of the readings.
1. Press and hold the SETUP button for two (2) seconds to enter the Setup mode. The SETUP
display icon will appear.
2. Use the arrow keys to scroll to the ‘ALL’ display.
3. Press the AVG REC button and the display will show ‘YES’ or ‘NO’ at the top of the LCD.
4.
Use the arrow keys to select ‘YES’.
5.
Under the ‘YES’ display the measurement functions are listed in smaller digits (PRESS-VEL-
FLOW). Use the SAVE CLEAR button to select the measurement ty
pes to delete.
6. Press the AVG REC button to clear the selected reading types. The meter will beep indicating
that that the d
e
lete process was successful.
7.
Press and hold the SETUP button for two (2) seconds to exit the Setup mode. The ‘SETUP’
display icon will switch off.
To Next Page
Loading...
Need help?
General
