EXTECHINSTRUMENTS
6HT200‐en‐GB_V1.411/16
DataHold
Press and hold the Unit/DH
button for 2seconds to enable the DataHoldfunction. The
HOLDdisplayiconwillappearthedisplayedreadingwillbefrozenuntilthebuttonispressedand
heldagain.
Note:TheHOLDfunctionisunavailablewhentheSETfunctionisenabled.
ManualDataRecording
PresstheREC button tomanuallyrecord(store)thecurrentreading.TheRECandRsymbol
willbrieflyappearontheLCDwhilethereadingisstored.
Note: The Record Reading function is unavailable in the HOLD, SET, and VIEW DATA RECORDS
modes.
ViewDataRecords
PressandholdtheBacklight/Mem
buttontoturnaccess(orexit)theViewDataRecords
mode. When the View Data Records mode is accessed, the record number is shown on the
bottom of the display, the associated reading is shown at the center or the LCD, and the ‘M’
memoryand‘REC’iconswillbevisible.
Usethearrowbuttonstoscrollthroughthestoredreadings.
PresstheMode/Set
buttontochangethemeasurementtype(i.e.WBGT,TA,%RH)forthe
currentlyselectedrecord.
PresstheUnit/DH
buttontoswitchthetemperatureunit.
PressandholdtheBacklight/Mem
buttontoexittheviewingdatarecordsmode.
Note:TheViewDataRecordsmodeisunavailablewhentheHOLDorSETfunctionisenabled.
Maximum‐Minimum(MAX‐MIN)ReadingRecording
PressandholdtheMax/Min buttontoentertheMAX‐MINrecordingmode.TheLCDwill
showtheMAXiconalongwiththemaximumtemperaturemeasurement.
UsetheMax/Min
buttontotogglebetweenMaximum(MAX)andMinimum(MIN)
readings.PressandholdtheMax/Min
buttonformorethan2secondstoexitthe
maximum/minimummode.
Note:TheMAX‐MINmodeisunavailablewhentheHOLD,SET,orVIEWDATARECORDSfunction
isenabled.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com