PRODUCT FUNCTIONALITY
21
Chapter 6
FUNCTIONING
In the “functioning” phase the user can set the functioning power using key 4 to decrease it and key 5 to
increase it, using key 2 or 3 increase or decrease the setting of the wanted room temperature. When the
product will have reached the set temperature, it automatically goes to minimum functioning mode.
The speed of the appliance in heating the room depends on multiple factors, both installation and
the buildings’ heat loss.
SWITCHOFF
To switch o press key 1 for 3 seconds. The machine will completely switch o only after having reached,
through the switch-o process, the control parameters set by the company.
INITIAL INSPECTION
The company recommends an initial ignition inspection, during which the technician will be happy
to accurately, and in depth, explain the most correct use for the type of home and according to the
requirements of the same customer.
To Next Page
Loading...
