ELISIR CLEANING
42
Chapter 2
ELISIR CLEANING
Maintenance operations guarantee correct functioning of the product through time.
Failure to comply with these operations can jeopardise the safety of the product.
BRAZIER CLEANING1.
The brazier must be cleaned every day.
remove the brazier from the relevant compartment and
free the holes using the appropriate supplied re irons
( gure 11.2)
remove the ash from the pot using a suction device
suck the ash deposited in the pot compartment
USING THE SCRAPERS2.
Cleaning of the heat exchangers allows to guarantee constant
heat output through time. This type of maintenance must be
performed at least once a day. To do this, just use the relevant
scrapers positioned in the upper part of the stove, making
upward movements and vice versa several times.
CLEANING THE ASH COLLECTOR TRAYS3.
The ash collection trays must be emptied when necessary by
removing the ash drawer in the lower part.
gure 2.1
gure 2.2
gure 2.3 gure 2.4
To Next Page
Loading...
