MAX300-RTG : Installation Manual Appendix A: Preinstallation
Checklist
85
MAX300-RTG Preinstallation Checklist
Customer: __________________________________ Date: ______________
Location: ____________________________________ Instrument: MAX300-RTG
____________________________________
1. Was any item damaged or missing during shipment? Yes___No___
a. If yes, was it reported to shipping company? Yes___ No___
b. Was it reported to Extrel (412-967-5754)? Yes___ No___
2. Do you have the appropriate MAX300-RTG Installation Manual? Yes___ No___
3. Has the enclosure been placed in its final position and does it
have the proper clearances? Yes___No___
4. Is the instrument connected to the correct A/C power? Yes___ No___
5. If the enclosure is to be operated in purged mode, has a supply of instrument
grade compressed air been connected to the purge inlet?
Yes___No___N/A___
6. If the instrument enclosure is to be operated in purged mode, has the
external purge loss alarm been connected? Yes___No___N/A___
7. Describe the network connection between the MAX300 and the Host PC.
a. Direct network? Yes___ No___
b. Both the Host PC and the Server connected to LAN? Yes___ No___
c. Internet? Yes___ No___
8. If you have external communication options (ex: analog outputs / inputs,
Modbus, DCS control etc.), are they connected to the instrument?
Yes___No___N/A___
To Next Page
Loading...