Extreme Networks 200 Series User Manual

Configuring the Summit 200 using ExtremeWare Vista
Summit 200 Series Switch Installation and User Guide 259
Figure 51: Miscellaneous Parameters and Timers
Use the next three sets of boxes, shown in Figure 52, to configure virtual links. When non-default values
are configured for a router ID or an area ID, the top table displays those values. In the following box
you can configure the timers for the virtual link (transit delay, hello interval, router dead time, and
retransmit interval).
For further information on virtual links, see“Virtual Links” on page 213.

Extreme Networks 200 Series Specifications

General

Brand	Extreme Networks
Model	200 Series
Category	Switch
Language	English