Summit WM Getting Started Guide, Software Version 5.1 107
4 Select Static Keys (WEP).
5 Type the values in the following text boxes:
● WEP Key Length – Size of a WEP Key.
● Input Hex – If you enable Input Hex, the WEP Key text box is displayed. Type the WEP Key
manually in this text box.
● Input String – If you select Input String, the following two text boxes are displayed –Strings and
WEP Key. Type the secret WEP Key string in the WEP Key String text box. The WEP Key text
box is automatically filled by the corresponding Hex code.
6 To save your changes, click Save.
Configuring WPA-PSK
To configure WPA-PSK privacy:
1 From the main menu, click WM-AD Configuration. The WM-AD Configuration screen is displayed.
2 In the left pane, click the SSID WM-AD for which you want to configure WPA-PSK privacy. The
Top o lo gy tab is displayed.
3 Click the Privacy tab.
To Next Page
Loading...
