Extreme Networks Summit WM - Configuring the Altitude AP

Summit WM Getting Started Guide, Software Version 5.1 59
Configuring IAS properties
To configure the IAS properties:
1 Click Start, point to Programs, point to Administrative Tools, and then click Internet
Authentication Service.
2 Right-click Internet Authentication Service (Local), and then click Properties.
3 In the Description text box, type a name that you want to assign to this IAS server.
4 If you do not want to record the rejected authentication requests, clear the Log rejected or discarded
authentication requests checkbox.
NOTE
You can use the log file to determine if unauthorized users are attempting to authenticate themselves in the
domain.
5 If you do not want to record the successful authentication requests, clear the Log successful
authentication requests checkbox.
NOTE
You can use the log file to determine the usage patterns of wireless users.
6 Click the Ports tab.
7 In the Authentication text box, type the Summit WM Controller’s port # that is used to access the
authentication (IAS) service.
8 In the Accounting text box, type the Summit WM Controller’s port # that is used to access the
accounting service.