Extreme Networks Summit WM - DHCP for Traffic Bridged Locally at Wireless AP; Summit WM Controllers Physical Description

Summit WM Controller, Access Points, and Software Solution
Summit WM Getting Started Guide, Software Version 5.118
DHCP for traffic bridged locally at Wireless AP
Figure 5: DHCP for traffic bridged locally at Wireless AP
The DHCP relay configuration is done via Summit WM Controller. For more information, see “Creating
and configuring a Bridge Traffic Locally at AP WM-AD” on page 95.
Summit WM Controller’s physical description
This section provides a physical description of the Summit WM Controller.
* A wireless device sends a
request for IP address to
Wireless AP.
* The Wireless AP forwards
the request to the DHCP
server.
* The DHCP server responds
by sending the IP address to
the Wireless AP.
* The Wireless AP sends
the IP address to the
wireless device.
Summit WM
Controller
Wireless AP
Wireless AP
Wireless
Devices
DHCP
Server
DNS
Server