Summit WM Getting Started Guide, Software Version 5.1 37
• User is the user id you used to login in. For example, admin.
• Port Status is the connectivity state of the port. M is for the Management interface, which is on eth0 and the
numbered lights reflect the esa ports on the system. Green indicates the interface is active and running. Red
indicates the interface is down. In the Summit WM100 Controller, the footer of the Wireless Manager does not
include the link status of the physical interfaces.
8 From the main menu, click Summit Controller. The Summit Controller screen is displayed.
9 In the left pane, click IP Addresses. The factory default settings for the Summit WM Controller are
displayed.
NOTE
Only the following models support VLAN:
• Summit WM2000 Controller
To Next Page
Loading...
