Extreme Networks Virtual Services Platform 7200 Series - Page 12

VSP 7200 Series Description Part numbers
Redundant power supplies
Important:
Make sure the air flow direction of your power supplies and fan modules match the same direction (either
front-to-back or back-to-front).
460 watt AC redundant power
supply
• The VSP 7254XSQ comes with one 460 W
AC PSU that is either back-to-front or front-
to-back.
• For full power redundancy, you can install a
second 460 W AC PSU.
• EC7205A1B-E6 (back-
to-front)
• EC7205A1F-E6 (front-
to-back)
800 watt AC redundant power
supply
• The VSP 7254XTQ comes with one 800 W
AC PSU that is either back-to-front or front-
to-back.
• For full power redundancy, you can install a
second 800 W AC PSU.
EC7205A0B-E6 (back-
to-front)
EC7205A0F-E6 (front-
to-back)
800 watt DC redundant power
supply
• The VSP 7254XSQ and VSP 7254XTQ
come with one 800 W DC PSU.
• For full power redundancy, you can install a
second 800 W DC PSU.
EC8005001-E6 (front-
to-back)
Note:
A (back-to-front)
DC power supply is
not supported.
Redundant fan modules
Important:
Make sure the air flow direction of your power supplies and fan modules match the same direction
(either front-to-back or back-to-front).
12 volt redundant fan module The VSP 7200 Series comes with three 12–V
fan modules for either front-to-back or back-
to-front air flow switch cooling.
EC7200BTF-E6 —
back–to–front fan
modules (includes three
fan module kits)
EC7200FTB-E6 — front-
to-back fan modules
(includes three fan
module kits)
Universal Slide Rack Mount Kit (300mm-900mm)
Slide Rack Mount Kit (300mm–
900mm)
The optional rack mount kit allows a switch to
be installed in a four post rack with depths
between 300mm and 900mm. It is designed
for use on the VSP 7200 Series, VSP 8200
Series and VSP 8400 Series.
EC8011002-E6
Table continues…
Hardware Models for VSP 7200 Series
March 2020 Installing the VSP 7200 Series 12