Extron electronics CrossPoint 450 Plus Series Setup Guide

17CrossPoint / MAV Matrix Switchers • Remote Control
Command SIS command
(host to switcher)
Response (switcher to host)
Aditional information
Video and audio mute commands
RGB or video mute
X@
*1B Vmt
X@
*1
]
Mute output
X@
RGB (video off).
RGB or video unmute
X@
*0B Vmt
X@
*0
]
Unmute output
X@
RGB (video on).
Read RGB or video mute
X@
B
X#]
1 = mute on, 0 = mute off.
Global RGB or video mute
1*B
Vmt1
]
Mute all RGB outputs.
Global RGB or video unmute
0*B
Vmt0
]
Unmute all RGB outputs.
Audio mute
X@
*1Z Amt
X@
*1
]
Mute output
X@
audio (audio off).
Audio unmute
X@
*0Z Amt
X@
*0
]
Unmute output
X@
audio (audio on).
Read audio mute
X@
Z
X#]
1 = mute on, 0 = mute off.
Global audio mute
1*Z
Amt1
]
Mute all audio outputs.
Global audio unmute
0*Z
Amt0
]
Unmute all audio outputs.
View output mutes
E
VM
} X$
1
,
X$
2
, ...
X$
n
]
Each
X$
response is the mute status of an output,
starting from output 1. n = the maximum number of outputs for this model.
Example:
CrossPoint 450 Plus 3232 HVA
E
VM
}
Mut02202000000000000000000000000000
]
Output 2, 3, and 5 audio is muted. All other outputs are unmuted.
NOTE: The Mut portion of the response appears only when the switcher is in Verbose mode 3. See the Verbose mode command on page XX. KEY: X@ = Output number
01
– (maximum number of outputs for your model)
X# = Mute
0
= off (unmuted)
1
= on (muted)
X$ = Video/audio mute:
0
= no mutes
1
= video mute
2
= audio mute

Extron electronics CrossPoint 450 Plus Series Specifications

General

Brand	Extron electronics
Model	CrossPoint 450 Plus Series
Category	Matrix Switcher
Language	English