F5 BIG-IP 6900 - Powering down the Unit; Rebooting the Unit; Clearing Alerts

Operating the LCD Panel
Platform Guide: 6900 and 8900 3 - 3
4. Press the Check button.
5. Press the Check button again at the confirmation screen.
6. Wait 30 seconds before powering the machine off or rebooting it.
Powering down the unit
Hold the X button for four seconds to power down the unit. We recommend
that you halt the system before you power down the system in this manner.
Rebooting the unit
Hold the Check button for four seconds to reboot the unit. You should only
use this option after you halt the unit.
Clearing alerts
Press the Check button to clear any alerts on the LCD screen. You must
clear any alerts on the screen before you can use the LCD panel.