Chapter 10
10 - 6
Hard drive replacement on a BIG-IP 10.0.1 system
If you are running version 10.0.1 of the BIG-IP software and have
previously used the sparedisk utility to copy the contents of your primary
hard drive to the spare hard drive, you can move the spare hard drive to the
primary hard drive bay.
Figure 10.3 The front of a 6900/8900 platform with front bezel removed
and the location of the primary and spare hard drives
Figure 10.4 The spare hard drive shown partially removed from the system
1. Primary hard drive
2. Spare hard drive
To Next Page
