FAAC 940SM Series - 940 SDM CONTROL BOARD

20
ENGLISH ENGLISH
MAIN
V ACC
V MOT
+ 24V
OUT 3
OUT 2
OUT 1
KEY
E-DET
I-DET
PSW 1
PSW 2
EM.1
EM.2
OPENED
NIGHT
MONODIR
ERROR
DP
1 2
ON
J8
SW5
RESET
J5
J6
J13
J12
J11
F1
F2
J1
J3
J7
J2
J4
SP-DOWN
SETUP
SP-UP
LED ON OFF MAIN 220V~ mains ON 220V~ mains OFF V ACC Vacc ON Vacc OFF V MOT motor powered up motor powered down + 24V + 24V ON + 24V OFF OUT 3 OUT 3 contact closed OUT 3 contact open OUT 2 OUT 2 contact closed OUT 2 contact open OU 1 OUT 1 contact closed OUT 1 contact open KEY KEY input closed Key input open E-DET E-DET input closed E-DET input open I-DET I-DET input closed I-DET input open PSW 1 PSW 1 input closed PSW 1 input open PSW 2 PSW 2 input closed PSW 2 input open EM.1 EMERG.1 input closed EMERG.1 input open EM.2 EMERG.2 input closed EMERG.2 input open OPENED OPENED input closed OPENED input open NIGHT NIGHT input closed NIGHT input open MONODIR ONE WAY input closed ONE WAY input open ERROR see table LED ERROR STATUS MEANING OFF normal operating status ON Alarms n° 18,20,22,24: execute SETUP SLOW FLASHING current alarm signalling FAST FLASHING setup/reset in progress or
during setup with the "kit elastic" activated
1 2 3 4 5 6 7 8 9 10 11 12 13
1 2 3 4 5 6 7 8 9 10 11 12 13 14
940SDM CONTROL BOARD940SDM CONTROL BOARD
940SDM CONTROL BOARD940SDM CONTROL BOARD
940SDM CONTROL BOARD
PUSH-BUTTON MEANING RESET executes reset SW5 pulse on “internal sensor” input (I-DET) SETUP executes automatic setup SP-DOWN reduces closing speed SP-UP increases closing speed
CONNECTOR MEANING J1 connector to J2 of second motor board J2 connector to J3 of second motor board J3 motor quick-fit connector J4 flat cable connector for encoder J5 terminal board J6 terminal board J7 NOT AUS emergency stop (NC contact) J8 RS232 serial port for PC connection J9 connector to J5 of second motor board J11-J12-J13 connectors for additional control boards
J9
DP ON OFF Dip n°1 motor rotation direction (see table) Dip n°2 RS232 port set RS232 port set
for S/W update for PC connection
FUSE MEANING F1 fuse 5x20 T 6.3A/250V (motor protection) F2 fuse 5x20 T 1A/250V (24V protection)