950N 22 732708 - Rev. F
ENGLISH
950 I/O BOARD
XPB MASTER SENSOR
8.3 OPENING AN CLOSING SAFETY SENSOR CONNECTION IN THE MASTER AND SLAVE CONFIGURATION
1. ASSEMBLE THE SENSORS ON BOTH SIDES OF THE DOOR
2. ON THE CLOSING SAFETY SENSOR, SET DIP 1 TO OFF
3. ON THE OPENING SAFETY SENSOR, SET DIP 1 TO ON
4. CONNECT THE MASTER SENSOR TO THE SLAVE SENSOR VIA
THE RELATIVE WIRE
5. CONNECT THE MASTER SENSOR TO THE 950 I/O EQUIPMENT AS DESCRIBED BELOW.
DO NOT CONNECT THE TERMINALS OF THE SLAVE SENSOR
g
i
m
h
i
27
h
n
To Next Page
Loading...
