FAAC B614 - Closing the Upper Lid

34
B614 31 732998 - Rev.A
2
1
Translation of the original instructions
ENGLISH
5.11 CLOSING THE UPPER LID
Li
If there is a flashing light kit, insert the connector
before closing the cover (see § 9).
1. (34) With the cover inclined, insert markers
1 in slots 2 on the box (rod side), then lower it on
the opposite side.
2. Close with the key: turn in an anticlockwise
direction.
3. Check the closure of the cover: try to lift it from
the two beam ends at the same time and then on
the opposite side.
Li
For the closure seal to be effective, it is necessary
for the door of the barrier to be closed and fixed
definitively.